New material product
-
“ A promise of 100 years stronger than iron”
APPIZ (apiiz) material improves the problem of existing PVC material, improves the tensile strength and impact strength at the same time, improves breakage problem and improves durability. It does not cause corrosion by nonconductive material, It is highly resistant to salt and is a new material with a semi-permanent life.
-
- Landscape, road, traffic safety and security facilities
- Photovoltaic stand and frame (marine type, roof type, flat type)
- Special local facilities (chemical resistance, chemical resistance, marine salt resistance)
- Hypothetical soundproof panel, main soundproof panel, windproof soundproof panel
Field of application of APPIZ (appiz) material
-
- Improved product durability by simultaneously improving tensile strength and impact strength.
- It is resistant to acids and bases, and is excellent in salt resistance, chemical resistance and chemical resistance.
- It is semi-permanent.
- It has no cracks or cracks under severe conditions and has excellent restoring force.
- (Test Frequency: 2Hz, Amplitude: ± 2.2˚, Frequency: 20,000 cycles) No damage or detachment of connections due to subsidence.
- Corrosion occurs due to electrochemical (potential difference) of metal, but APPIZ material is nonconductive and does not cause corrosion.
- And contamination by heavy metals such as rust is prevented.
- 100% recyclable material.
APPIZ Features of material
-
- Fracture Strength and Seismic Performance Test
- Fatigue test (life certification of more than 100 years)
Features of APPIZ material (performance test)
30t folklore field experiment
30t folklore field experiment
Damage to joints due to subsidence, prevention of leaks and leaks
<Joint displacement angle10.4~13.8˚>Seismic Test (Korea Institute of Construction Technology)
< Test frequency : 2㎐, amplitude : ±2.2˚, Count : 20,000cyccle>
Fatigue Test
- No change in surge test of 2 million cycles.
☞ Over 100 years of life proof
▶ 10↔15㎏f/㎠ Hydraulic repetition test (1 cycle)
▶ Seven cycles per minute
▶ 50 cycles = 1 day lifetimeRigidity test: No pipe cracks until pipe diameter is 20%
-
- Bridge drainage facility ① Construction site photo
Products covered by APPIZ
-
④ APPIZ material drainage specification
division APPIZ (polyacrylic rubber copolymer) image Nominal Diameter and Thickness Φ165 X 7T Weight 4.86kg / M Method Assembly type (Cap tightening type) Advantages ∙ Excellent quality uniformity as a standard product
∙ Easy installation with light weight
∙ Good maintenance and maintenance due to assembly type
∙ Excellent price competitiveness of materials and construction cost⑤ Features of drainage system: No scale due to corrosion, no clogging due to grease, no maintenance cost.UPVC, cast iron pipe is clogged by grease scale
<Malaysia UPVC pipe>
<Malaysia Cast iron pipe>vvAPPIZ pipes are not clogged by grease
▲ Pipes will be built in 2014 as an underground tube at Hilton Hotel in Kuala Lumpur, Malaysia
(Replacing old cast iron pipe)Achieved SIRIM certification with AGA (Anti Grease Accumulation) performance
※ SIRIM:Malaysia Standard Industry Research InstituteUPVC, cast iron pipe construction in Malaysia, resulting in pipe clogging in Greece scale.
Replace with APPIZ material in 2014 and no clogging to date (photograph and data provided by local contractor)
-
- Landscape, security, safety facilities
Products covered by APPIZ
① Sunlight frame
Increased adhesion and adhesion
Securing safety of jointsSecuring safety of joints
Engineering plastic ring,
EPDM rubber ring two-layer structure
Completely blocked offensive odor,
U-trap application
Height adjustable and interchangeable
Excellent workability and economical efficiency
Safe construction without stress!
One-touch construction without cap and rubber ring
A promise of 100 years stronger than iron
▣ Ensuring safety against load
▣ Resistant to acids and bases
▣ Permanent non-slip
▣ Surface burning performance satisfaction
Total 14.5t truck passing test- clear
Slip performance test (slope 15˚, rainwater) - zNo slip
Surface burning - Performance of FTP Code part 5
Test Items | standard | Test result |
---|---|---|
Average sustained heat of combustion(MJ/㎡) | ≥0.25 | 39.2 |
Critical heat flux during digestion(Kw/㎡) | ≥7.0 | 43.7 |
Total calorific value(MJ) | ≤2.0 | 1.5 |
Maximum heat release rate(Kw) | ≤10.0 | 1.3 |
Flame fall(EA) | Less than 10 | 3 |
-
- Foreign Certification Status
APPIZ certification
NSF
( US National Sanitary Standard)
AWWA
( US Waterworks Association)
ASTM
( American Materials Association)
FED
( US Army corps of Engineers )
-
- Domestic Certification Status
NEP New Product Certification
( Ministry of Commerce, Industry and Energy )
Green Technology Product Recognition
( Ministry of Environment)
Outstanding product designation
( PPS)
Quality management system certification
( ISO 9001 )
KS certification
( Korea Industry Standard)
Hygiene Safety Standard Certification
( Korea Waterworks Association)